How To Clear Service 4Wd Light Ram 1500

The service 4WD light comes on when there is a problem with the four-wheel drive system. To clear the light, you must first identify and fix the problem.

How To Clear Service 4Wd Light Ram 1500

There can be a few reasons why the service 4wd light is on in a Ram 1500. One possibility is that there is an issue with the 4wd system, and it needs to be serviced. Another possibility is that there is a problem with the transfer case, which could require servicing. The light could also be on because of a problem with the front axle or the rear axle. In any case, it’s best to take the truck to a mechanic to have the problem diagnosed and

The required tools and material needed for clearing the service 4WD light on a Ram 1500 are a scanner, an obd2 cable, and a software program. The scanner is necessary to read the codes that are causing the light to come on. The obd2 cable is needed to connect the scanner to the vehicle. The software program is used to interpret the codes that are being read by the scanner.

  • Turn the ignition to the on position
  • Turn the engine off wait for 10 seconds turn the engine on
  • Press and release the brake pedal
  • Move the selector lever to the neutral position

-There could be a few different things causing the service 4wd light to come on in a Ram 1500. It could be a problem with the 4wd system itself, or there could be an issue with the vehicle’s computer. -If the service 4wd light comes on, it’s best to take the truck to a mechanic to have it checked out. -Some common problems that can cause the service 4wd light to come on include problems with the transfer case,


Frequently Asked Questions

What Does Serv 4Wd Light Mean?

The “SERV 4WD” light illuminates on the instrument cluster when the transfer case is in the “SERVICE” mode.

What Does Svc 4Wd Mean Dodge Ram?

SVC 4WD stands for Selectable Vehicle Control 4 Wheel Drive. It is a system on Dodge Ram trucks that allows the driver to choose between two-wheel drive and four-wheel drive modes.

What Would Cause The Vsc Light To Come On?

There are a few things that can cause the VSC light to come on. One possibility is that there is a problem with the traction control system. Another possibility is that there is a problem with the Vehicle Stability Control system.

What Does Service 4Wd Mean Jeep?

Service 4WD means Jeep is in 4-wheel drive mode.

How Do You Reset 4Wd Light?

There are a few different ways to reset 4WD light. Some people use the method where they turn off the engine and then open and close the driver’s door. Others use the key fob method where they press and hold the lock and unlock buttons at the same time.

What Causes Service 4Wd Light?

There are a few things that can cause the service 4WD light to come on. One possibility is that there is an issue with the 4WD system, such as a problem with the transfer case or a broken axle. Another possibility is that there is an issue with the vehicle’s emissions system, such as a faulty oxygen sensor.

What Does Svc Light Mean?

The SVC light is a warning light on a car’s dashboard. It usually indicates a problem with the car’s cooling system.

How Do You Reset The Service Light On A 4 Wheel Drive?

I don’t know how to reset the service light on a 4 wheel drive.

How Do You Reset The Service Light On A 2012 Dodge Ram 3500?

The service light on a 2012 Dodge Ram 3500 can be reset by pressing and holding the Reset button on the instrument panel for five seconds.

How Do You Reset The Service Light On A Dodge 4Wd?

There is no one definitive answer to this question, as the process may vary depending on the make and model of Dodge 4WD in question. However, some tips on how to reset the service light on a Dodge 4WD may include turning the vehicle off, then disconnecting and reconnecting the battery; or pressing and holding certain buttons while starting the engine. It is always best to consult the owner’s manual for specific instructions on how to reset the service light on your particular Dodge 4WD.

How Do I Fix My Vsc Light?

If the VSC light is on, this usually means there is a problem with the traction control system. To fix this, you will need to take your car to a mechanic to have it looked at.

How Do You Reset The 4 Wheel Drive Light On A 2012 Dodge Ram?

The 4 wheel drive light on a 2012 Dodge Ram can be reset by turning the key to the “on” position and then hitting the brake pedal.


Taking Everything Into Account

There are a few things you can do to clear the service 4WD light on your Ram 1500. One is to check the level of your fluid, and make sure it’s at the correct level. You can also try resetting the light by disconnecting the battery for a few minutes. If neither of those work, you may need to take your truck to a mechanic to have the light reset.

Leave a Comment