How To Make A Lightsaber Blade

A lightsaber blade is not difficult to make, but it does require some practice and a few simple tools. The most important part of making a lightsaber blade is to get the right balance of light and dark colors on the blade. Too much light and the blade will be too easily seen in battle, while too much darkness will make it difficult to see. Here is a simple guide on how to make a lightsaber blade: – Get a piece of thick cardboard or foam board that is at

How To Make A Lightsaber Blade

How to make a lightsaber blade: 1. Collect materials. You will need a metal rod, a PVC pipe, electrical tape, and a hacksaw. 2. Cut the metal rod to the desired length of your lightsaber blade. 3. Cut the PVC pipe to the desired length of your lightsaber hilt. 4. Wrap electrical tape around one end of the metal rod until it is completely covered. This will be the end of your lightsaber blade.

-A lightsaber hilt -A blade core -Electrical tape -A drill -A jigsaw -A circular saw -A hacksaw -A sandpaper block -A metal file -A lighter

  • Get a tube of led light
  • Cut a small slit in the end of the led light insert the led light into the lightsaber re
  • Get a battery operated lightsaber
  • Remove the end cap of the lightsaber

-The length, width and thickness of the blade -The type of metal or alloy to be used -The power source -The activation switch -The hilt

Frequently Asked Questions

Can You Make A Real Life Lightsaber?

Yes, one can make a real life lightsaber. The materials needed are a metal tube, a LED light, a battery, and a switch. The metal tube is the lightsaber hilt, the LED light is the blade, the battery is the power source, and the switch is what turns the lightsaber on and off.

How Do You Make A Jedi Lightsaber?

There are a few ways to make a Jedi lightsaber. One way is to find an old light saber and take it apart. Another way is to build your own lightsaber from scratch.

How Do You Fly A Lightsaber At Home?

There is no one definitive answer to this question, as there are a variety of ways to fly a lightsaber. Some people use a fan to create the illusion of flight, while others use techniques like swinging the lightsaber around in a circle or making it spin on its axis.

How Do You Make A Lightsaber Propeller?

First, take a piece of lightweight cardboard and cut it into a circular shape. Next, cut out a small hole in the center of the cardboard. Then, using a hot glue gun, attach a lightsaber blade to the center of the cardboard. Finally, use tape to attach two small propellers to the top and bottom of the lightsaber blade.


There is no definitive way to make a lightsaber blade, as each builder may have their own preference and techniques. However, some tips on how to make a lightsaber blade include using a sturdy material such as metal or plastic tubing, using a blowtorch or heat gun to soften the material and create the desired curve, and using a saw to cut the material to the desired length.

Leave a Comment